You are logged in as a guest. ( Logon | Register Now! )



Sticky Wrechin2's modified engines
Jump to page : 1 2
Now viewing page 2
   Fishing Boats, Motors, Trailering, Q & A or Discussion

Posted by Auburnwes
11/30/2011 12:14 AM
Allot of sweet engines have been rolled out of the Perry Factory!

Posted by wrechin2
11/30/2011 12:15 AM

EricM - 11/29/2011 11:02 PM Uh-oh, that reminds me - the one year warranty on my Perry-built Johnson 150 is nearing the end!!! Actually, I'm not a bit concerned. The old girl has been perfect since he built it. Thanks again James!!!!!!!!!!!

No problem! Thanks again for the fishing lessons!!!!!

Posted by wrechin2
11/30/2011 12:17 AM

Auburnwes - 11/29/2011 11:14 PM Allot of sweet engines have been rolled out of the Perry Factory!

I know of one that you have a personal interest in!!!!!!!!!! LOL

Posted by Auburnwes
11/30/2011 12:30 AM
wrechin2 - 11/30/2011 12:17 AM

Auburnwes - 11/29/2011 11:14 PM Allot of sweet engines have been rolled out of the Perry Factory!

I know of one that you have a personal interest in!!!!!!!!!! LOL




Hmmm Wonder which one that is....

Edited by Auburnwes 11/30/2011 12:31 AM
Posted by Allyfishing
11/30/2011 6:08 AM
Yeah, I have one of Tony's ACU's.
Posted by Auburnwes
11/30/2011 11:00 AM
Allyfishing - 11/30/2011 6:08 AM

Yeah, I have one of Tony's ACU's.


He's already ahead of the game!!
Posted by Allyfishing
12/2/2011 6:25 AM
Yup...gives me options!!
Posted by wrechin2
12/14/2011 10:42 PM
Allyfishing - 12/2/2011 5:25 AMYup...gives me options!!
Gives you a TON of options!
Posted by Allyfishing
12/15/2011 6:49 AM
From a stock 1996 225 ProMax how much HP can you get out of modding the engine and what are the mods that can be done? Just wondering. I only have 105 hours on this fresh rebuild now and there have been no mods done to the powerhead. Just the normal stuff left off the engine that most guys do to a rebuilt ProMax. The pistons used are Vertex pistons and steel cage bearings.

BTW James, I'm getting a kick out of reading your comments on BBC in the 2.5 high performance forum with you know who!! His feathers are all puffed out!! LOL!!!! But you have been a gentleman in a weird kind of way!! LOL!!!!!!!!!!
Craig
Posted by Oldman
12/15/2011 7:16 AM
buggy gentleman blahahahaha
Posted by Oldman
12/15/2011 7:16 AM
he cant even spell it.lol
Posted by Allyfishing
12/15/2011 7:17 PM
Oldman - 12/15/2011 7:16 AM

buggy gentleman blahahahaha


what?
Posted by wrechin2
12/16/2011 12:06 AM

Allyfishing - 12/15/2011 6:17 PM
Oldman - 12/15/2011 7:16 AM buggy gentleman blahahahaha
what?

 

Don't worry about it! He is on drugs!!! LOL!

With the stuff you have, it can be ported many larger HP copies and then fed correctly. If cut to a 260 it will make close to it as the nik does make a little more power but steel is easier to work and more forgiving. The major difference is the 260 is a dry reed where the pro max is a wet reed. The 260 injectors are one the side of the front half and spray after the reed where the PM sprays the fuel directly onto the reed Thus a "WET" reed.

 

BTW: I am done with that thread. I said what I had to say and I am done! I will poke at him still on some of the other threads!!!

Posted by Allyfishing
12/16/2011 6:26 AM
Posted by tsabadlk
2/21/2013 10:00 PM
I know this is an old thread but I would like to say that you do great work Wrechin2
Posted by wrechin2
4/6/2013 7:21 AM

tsabadlk - 2/21/2013 9:00 PM I know this is an old thread but I would like to say that you do great work Wrechin2

 thanks.

Posted by fischnrod
4/6/2013 7:51 AM
tsabadlk - 2/21/2013 11:00 PM

I know this is an old thread but I would like to say that you do great work Wrechin2


His head is already big enough without any help...lol

If I'm ever able to get back at it like I use to I'm going to see how far and fast I can run before mine lays down
Posted by IFish
3/14/2014 5:42 AM
James really lives all the good things you all have said about him. It is nice to have some one with his knowledge and talent to live so close to us. Now I could go on to say a lot of nice things about him like you all have. Such when he scaled the side of a cliff to get a jug of water or when he rushed into a burning house to save a arm load of furniture or even when he knowingly walked into the bank of robbers with hostages and talked them down by exposing the differences between a aluminum 2.4 horse power and a 2.5 cast horsepower. But I won't tell you about that James is awesome and deserves these great comments. I do call him my friend. And let's not forget about Wess! He rocks as well!!!! You guys keep up the good work. I appreciate you every day.
Posted by brushhog
4/20/2015 12:11 PM
very nice!
Posted by ChooChooSnakeMan
5/5/2015 10:51 AM
Very nice James. For all you CFFers out there who don't know, James is a true craftsman and cares about his work. I've seen his operation and it is amazing what he has put together and is able to do. It is very impressive. By the way James how does the CNC retrofit go?
Posted by wrechin2
5/6/2015 5:56 PM
Coming right along. In process of proof reading my program and getting ready to ramp up my sleeve cutting line. I am going to have to replace my controller as it does not like backlash comp or probing. I have to hand write the G31 code and it works great on all 4 axis. It goes erratic if I use a center finding script. I What i have cut has been dead on and great finishes. It is cutting all the ports in a little over 3 minutes and I am still tweaking! Thanks for the help!
Posted by Kojak5973
5/8/2016 10:21 PM
This is Shane mullinax I'm thinking about buying Carl Guffey motor you built could you call me or text I would like to talk to you about 706 537 1264
Spread the word

del.icio.us Digg Furl Reddit BB Google Ma.gnolia Netscape Simpy StumbleUpon Technorati Live Yahoo!

Jump to page : 1 2
Now viewing page 2
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
 

Advertiser
Action Alarms DJs Electronics Keller Williams Realty Piscifun Scenic City Fishing Matt Sage Insurance Tenn. Fishing

Advertiser

CFF Calendar
October 2018
SMTWTFS
  1 2 3 4 5 6
7» 8 9 10 11 12 13»
14 15 16 17 18 19 20
21» 22 23 24 25 26 27
28 29 30 31      

Upcoming events (next 2 weeks)
Oct 21 Dream chasers open tournament

Advertiser

Random Photo
11/28/2015
Sixer

"11/28/2015 Sixer"
Album: fchupaska


(Delete all cookies set by this site)

Copyright © 1996-2018 All rights reserved.
Duplication in whole or in part of this Web site without express written consent is prohibited.
CFF Privacy Policy

Running MegaBBS ASP Forum Software
© 2002-2018 PD9 Software