Special Thanks to TN Bullet

I needed help
The electronics on my boat have gradually been updated and changed
I have a 9 Touch gen 2 on the bow
and I have 2 9 touches on the console, a gen 2 and a carbon that I added Wednesday
I also added a point one and the NEMA 2000 network</p>

So many changes and up grades my electronics far surpassed my abilities

I needed help setting them all up and getting a baseline to begin from
</p>

I had spoke with Col Deering and agreed to hire him to set them up
But he passed away before we could do it

Enter TN Bullet who offered to do the same thing for me

We met at Harrison Bay this morning and he went through every setting on each unit
He gave me a paper print out of how he sets the units up so that if I change something and latter get lost I can return to where we started


We then took the boat out and he showed me how the side imaging and down imaging looks over various structures
I learned a lot today!

It was well worth the small fee he charges
He spent about 2.5-3 hours with me</p>


If anyone else has considered doing this, don't hesitate!

I highly recommend TN Bullet!
</p>
 

Tn bullet

New member
Thank you for the kind words it was a pleasure helping you and anytime you need help don’t hesitate to call me! Thank you again always enjoy helping fellow fisherman
 
Top