I have a Triton Tr21 and a 200 efi Mercury what do you guys have for motor set to prop to pad?
B Bassman tr21 Member Aug 30, 2018 #1 I have a Triton Tr21 and a 200 efi Mercury what do you guys have for motor set to prop to pad?
T Tn bullet New member Aug 31, 2018 #2 Start 1/2” below and work it up take tools to the lake and run it watch water pressure
B BullMerc225 Member Aug 31, 2018 #3 On that boat you are going to be well below 1/2" below the pad. This is not a bullet. I would start out about 2 3/4" below the pad.
On that boat you are going to be well below 1/2" below the pad. This is not a bullet. I would start out about 2 3/4" below the pad.
T Tn bullet New member Aug 31, 2018 #4 You are right Hayden it needs to be lower on my triton I had 225 and was about an inch below not sure why I put that was supposed to be 1 1/2 also will depend on what prop he is turning
You are right Hayden it needs to be lower on my triton I had 225 and was about an inch below not sure why I put that was supposed to be 1 1/2 also will depend on what prop he is turning
B BullMerc225 Member Aug 31, 2018 #6 Doing well sir, I am out there quite a bit, not sure why we haven't crossed paths. Hope you are doing well.
Doing well sir, I am out there quite a bit, not sure why we haven't crossed paths. Hope you are doing well.