motorola z3

screwball

Member
I bought a motorola z3 phone and had a screen saver installed and it comes loose on the right side of the screen. There have been 4 put on and everyone of them does the same thing. Motorola or verizon says there is nothing wrong with the phone. I have tried the cheap one and the most expensive one and the all do the same thing. Anyone else had this problem or know what causes it. The only thing I can think of is the screen isn't flat.
 

muskyman

Member
when you prep the screen for the screen saver, use a small alcohol wipe that you would use to clean reading glasses. Then use a fiber cloth to clean the screen. Then take regular scotch tape, the clear stuff, and cut pieces to cover the entire screen, overlapping each piece. Then pull the tape off, it should all come off as one piece. Then immediately put on your screen saver / protector. This process removes most debris and that is what usually causes imperfections after a screen protector is put on. You can come to my store and I can put it on for you too, I do about 10 a day.
 

screwball

Member
Verizon put all of them on and I watched the process and they did what you described. still comes loose in the same place every time.
 

muskyman

Member
It has got to be the curved screen that is stopping it. It is more difficult to get them to stay on them, but this is one of them that just may not take to them very well. What about the liquid application product ? I have heard good results on it.
 
Top