You are logged in as a guest. ( Logon | Register Now! )

2005 Tracker Pro Crappie 175 with Mercury 50HP Motor
Jump to page : 1
Now viewing page 1
   Sponsor & Classified CFF Classifieds -- "Boats, Motors and parts".

Posted by BassERT
3/2/2019 7:12 PM

2005 Tracker Pro Crappie 175 with Mercury 50HP Motor - $6,500.00

This is not your ordinary Crappie fishing boat.

I have used this boat every day that I am able to get

out since I am retired with trips averaging 3 to 4 hours.

This boat has been used for everything from Stripers to Bluegill.

I have set it up with electronics and everything

you need to have fun fishing.

This boat has been mechanically serviced regularly with a recent tune-up.

This boat has been modified from a 12v to 24v Trolling Motor.

From Bow to Stern here are the main features:

  • Minkota Maxxum 24v Trolling Motor 1 year old

  • Huminbird Helix 7 Down Imaging with GPS on RAM Mount on Bow

  • Comfortable pedastal fishing seats front and rear

  • Bait well which I use for dry storage

  • Forward live well

  • Additional Dry stroage under seat

  • Rod Locker on passenger side

  • New driver and passenger seats

  • Huminbird Onix 10 Side and Down Imaigng with GPS on RAM Mount at Console

  • Live Well under passenger seat

  • Additional Bait Live well being used for dry storage

  • Two Pedestal positions for rear fishing seat

  • Minkota 3 Bank Charger for easy plug in charging

  • This has a custom added Voltage Switch which allows you to

select battery one or battery two or both and off for charging

  • The Trolling Motor is on a 50 AMP block

  • At the Stern is a PowerPole Micro Anchor with 8' Pin on a removeable

bracket on the transom.There are two FOB controllers for it as well as a phone APP

  • Two Inch Boat Buckle Tie Downs

And on the Trailer from Bow to Stern:

  • It has a folding tongue with wire retractable saftey hooks (no chains hanging on the ground).

  • The little wimpy winch that was originally on the trailer has been

replaced with a 1800lb winch for easy cranking. (Overkill is my middle name )

  • The pivot jack has also been replaced with a 1200lb unit

  • All lights functioning and water proof.

  • New Axle with Steel-belted Radial Tires

  • New Bearings

  • Spare Prop and Motor Toter

Posted by BassERT
3/4/2019 3:50 PM
I made an error on the price
It was supposed to read "asking $6000.00"

I hope this will help





Attachments Bass_storage_emulated_0_DCIM_Camera_IMG_20160526_063333340.jpg (24KB - 91 downloads)
Attachments BassIMG_0106.jpg (80KB - 105 downloads)
Attachments BassIMG_0108.jpg (76KB - 99 downloads)
Attachments BassIMG_0109.jpg (83KB - 114 downloads)
Posted by BassERT
3/9/2019 4:57 AM
Price lowered to $5,500
Posted by Cchurch6
3/9/2019 8:37 AM
Is it a local boat? Looks like it has Florida tags, ever seen salt?
Posted by chase
3/9/2019 9:02 PM
If interested in a trade. Look at my post about the 1996 20’ Ranger. Contact me.

Posted by foodsaver
3/9/2019 9:30 PM
Was that drumkings boat?
Posted by BassERT
3/10/2019 6:08 PM
It was a boat that I got from a Charley in Forsythe, GA
It was showroom when I got it and the guy wanted to sell to someone who wants to fish it .
That would be me, as you could literally remove the engine cover and lick it and it was clean, less than fifty hours or so on the motor.
I took it to wrenchin and he said it tested for leakdown and compression without any problems an gave it a top grade. (one of the best he had tested)

I got it to fish and I outfitted it with nice reliable gear and use it every day (still do) that I can get out
I'm going in the AM and I love the micro anchor as I fish solo most of the time.
Regular upkeep on tune ups and water pump exchanges, lower unit etc..

No saltwater no ethanol never.

Bass fish in FL and Whites, striper and crappie in TN
I originally had TN numbers on it and then a few years ago I re-registered in Florida.

I don't want to trade it for a different boat I want to sell it to someone who like me wants to fish the heck out of it.
It is a good deal for someone set up the way it is.

Craig, I got it because I liked the layout from learning to crappie fish in DK's boat and this one was younger than DK's
Posted by BassERT
3/21/2019 6:25 AM
Bump for an offer
Posted by foodsaver
3/21/2019 12:52 PM
Posted by BassERT
3/31/2019 6:12 AM
I'm planning to be in Chattanooga after next week by the 10th
Posted by BassERT
4/9/2019 5:53 AM
Should be in Chattanooga by Thursday 4/11

Sell this boat make an offer
Posted by BassERT
4/14/2019 8:48 PM
Thank you
Spread the word Digg Furl Reddit BB Google Ma.gnolia Netscape Simpy StumbleUpon Technorati Live Yahoo!

Jump to page : 1
Now viewing page 1
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



CFF Calendar
June 2020
  1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30        

Upcoming events (next 2 weeks)


Random Photo

Album: ---

(Delete all cookies set by this site)

Copyright © 1996-2020 All rights reserved.
Duplication in whole or in part of this Web site without express written consent is prohibited.
CFF Privacy Policy

Running MegaBBS ASP Forum Software
© 2002-2020 PD9 Software