shut-up-and-fish
New member
https://youtu.be/RtkthwU5E5Y
https://youtu.be/XxBHBg1yUDA
https://youtu.be/pKYOF_FnU00
The Pole Ducer allows for the end-user to keep in touch with there target 100% as seen in this video.
https://youtu.be/4Jq36nrSFRU
You deploy The PoleDucer at the ramp and stow it at the ramp and simply lower it while fishing, and raise it while running to your next stop. Simple, Yet Effective...
https://youtu.be/rZWHFCa9B4w
We developed the 60" shaft out of fiberglass utilizing a marine-grade resin for strength and longevity. Lifetime warranty on the shaft. The inside diameter allows for the transducer cable to be run inside the shaft eliminating the need to have the transducer cable secured somehow (zipped tied) outside the shaft. This was part of the simple, clean appearance we were looking for. The fiberglass shaft along with the D-Size 2.25" RamMount allow for the "break-away" ability thus not causing damage to the shaft or transducer if striking an underwater object. The PoleDucer allows the angler total control of the transducer to be pointed at the intended target and not have their images skewed by the trolling motor turning left/right etc...That being said the PoleDucer is also a great option for any transducer and can be rotated in a 360-degree fashion to see all around your boat.
For those that have an electric-steer trolling motor like the xi3, xi5, Ulterra, Terrova or PowerDrive V2 The PoleDucer is simply another option to mount the transducer to instead of purchasing the cable guard system required from other companies to mount a transducer to those type trolling motors.
Mounting: The PoleDucer can be mounted to the Fortrex or Ultrex trolling motor side plate or to the gunnel of your boat.
The RamMount is 3.25 lb. (which is dead weight when attached to the boat) and the PoleDucer is 5.25 lb.
https://youtu.be/XxBHBg1yUDA
https://youtu.be/pKYOF_FnU00
The Pole Ducer allows for the end-user to keep in touch with there target 100% as seen in this video.
https://youtu.be/4Jq36nrSFRU
You deploy The PoleDucer at the ramp and stow it at the ramp and simply lower it while fishing, and raise it while running to your next stop. Simple, Yet Effective...
https://youtu.be/rZWHFCa9B4w
We developed the 60" shaft out of fiberglass utilizing a marine-grade resin for strength and longevity. Lifetime warranty on the shaft. The inside diameter allows for the transducer cable to be run inside the shaft eliminating the need to have the transducer cable secured somehow (zipped tied) outside the shaft. This was part of the simple, clean appearance we were looking for. The fiberglass shaft along with the D-Size 2.25" RamMount allow for the "break-away" ability thus not causing damage to the shaft or transducer if striking an underwater object. The PoleDucer allows the angler total control of the transducer to be pointed at the intended target and not have their images skewed by the trolling motor turning left/right etc...That being said the PoleDucer is also a great option for any transducer and can be rotated in a 360-degree fashion to see all around your boat.
For those that have an electric-steer trolling motor like the xi3, xi5, Ulterra, Terrova or PowerDrive V2 The PoleDucer is simply another option to mount the transducer to instead of purchasing the cable guard system required from other companies to mount a transducer to those type trolling motors.
Mounting: The PoleDucer can be mounted to the Fortrex or Ultrex trolling motor side plate or to the gunnel of your boat.
The RamMount is 3.25 lb. (which is dead weight when attached to the boat) and the PoleDucer is 5.25 lb.