![]() Jump to page : 1 Now viewing page 1 | Previous :: Next |
Fishing Fishing Discussion | Message format |
rsimms![]() |
| ||
Dam Fish Whisperer Posts: 7895 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Chattanooga (74.221.181.117) | After a video posted on Facebook from some "well-connected" individuals, it looks like much-needed repairs are FINALLY coming for the Chester Frost Park Boat Ramp: https://bit.ly/3nOMVst ----- ![]() Richard Simms Scenic City Fishing Charters, Inc. http://www.ScenicCityFishing.com Read my book, "An Outdoor State of Mind" http://stores.lulu.com/rsimms | ||
Spinnerbait165![]() |
| ||
Member Posts: 44 ![]() Location: Weatherford, Texas (99.76.183.78) | Nice article Richard. And some very good news .... | ||
WarEagleChatt![]() |
| ||
Regular Posts: 68 ![]() ![]() Location: Hixson, TN (68.53.205.17) | That’s good news. So, if power loading is the big contributor to the issue, is anything going to be done to minimize or eliminate it? I understand this is problematic, but if nothing changes won’t we be right back in this situation a couple of years from now? | ||
Spinnerbait165![]() |
| ||
Member Posts: 44 ![]() Location: Weatherford, Texas (99.76.183.78) | "Power loading" can and does contribute to ramp problems in certain places and under certain conditions. But if the ramps are of adequate length in the first place it isn't an issue. And loading with a bit of power doesn't cause a problem if the boat is within a couple of inches of the bow roller and the engine is trimmed up a bit. Those that cause issues are the ones who never got the trailer in deep enough in the first place. | ||
FishingwithRusty![]() |
| ||
Expert Posts: 1986 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Harrison, TN (152.130.8.6) | power loading isnt a problem if the ramps are built correctly. i wont hold my breathe on things getting done but glad to see some traction. THANKS to the gentlemen who spearheaded this deal with the video! ----- There is NO substitute for time on the water!! True South Custom Lures "Fish with Confidence!" Piscifun "Go with Family" Taipan Rods | ||
silvertalon![]() |
| ||
Elite Veteran Posts: 991 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() (23.251.89.254) | According to the article there is a promise to at least do something temporary to ease the problem. I am optimistic that TWRA will step in to help with funding/project to get it fixed. Hats off to Mr Frazier for the exposure and the making of the video. | ||
pop22![]() |
| ||
Veteran Posts: 240 ![]() ![]() ![]() Location: Chickamauga (68.53.212.11) | The work will start in March so the ramp will be closed all summer. | ||
fischnrod![]() |
| ||
Addicted to CFF Posts: 5407 ![]() ![]() ![]() ![]() ![]() Location: dallas bay/soddydaisy (68.53.207.82) | We will have to use the ramp by the beach | ||
FishingwithRusty![]() |
| ||
Expert Posts: 1986 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Harrison, TN (152.130.8.6) | pop22 - 1/14/2021 2:04 PM The work will start in March so the ramp will be closed all summer. LMAO!!!!!!!!!sounds about right ----- There is NO substitute for time on the water!! True South Custom Lures "Fish with Confidence!" Piscifun "Go with Family" Taipan Rods | ||
WarEagleChatt![]() |
| ||
Regular Posts: 68 ![]() ![]() Location: Hixson, TN (68.53.205.17) | Beach Ramp. At least that pesky dock won’t be in the way there! It’s still sitting over in the grass by the parking lot since last spring. Edited by WarEagleChatt 1/14/2021 2:01 PM | ||
ChooChooSnakeMan![]() |
| ||
Elite Veteran Posts: 932 ![]() ![]() ![]() ![]() ![]() ![]() Location: Ooltewah (173.247.16.242) | That is good news that the ramp will be improved. What is important is the fact that some boat brands / models are designed that power loading is required. For example, my Skeeter FX21 and trailer is such that you can't get the hull far enough up on the trailer bunks manually and be able to winch it up to the bow trailer roller. My Lowe 17' tin boat is easy to load without using the outboard. I can just line up to the trailer and coast up far enough that winching the last few inches is easy. Not so with the Skeeter design. I hope the ramp repairs include extending the ramp enough so that our outboards don't cause erosion to the lake bottom. Another concern is if the main ramp is going to be closed all summer and with the news that I read that says permits will be needed for tournaments and that parking will be limited I think Chester Frost this summer will be very crowded when you add in all the recreational boats and non tournament fishing. This will cause other ramps such as Harrison Bay to be even more busy! ----- ChooChooSnakeMan Skeeter FX 21 Yamaha 250 SHO / Lowe Stinger 17HP Merc 90 Optimax | ||
Oldman![]() |
| ||
Addicted to CFF Posts: 6974 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: soddy daisy (204.93.124.214) | i believe the patch will be done but the real fix?????????????? ----- "It has to be true, I read it on the internet !!!" | ||
Tenncrapie![]() |
| ||
Elite Veteran Posts: 742 ![]() ![]() ![]() ![]() (68.42.10.232) | Who ever was measuring tell them not to go to charleston and measure it drops off 20ft in winter. | ||
pop22![]() |
| ||
Veteran Posts: 240 ![]() ![]() ![]() Location: Chickamauga (68.53.212.11) | When the repair is completed it would be nice if a marker was placed at the end of ramp on both sides so we wouldn't need to guess | ||
Spinnerbait165![]() |
| ||
Member Posts: 44 ![]() Location: Weatherford, Texas (99.76.183.78) | pop22 - 1/16/2021 12:46 PM When the repair is completed it would be nice if a marker was placed at the end of ramp on both sides so we wouldn't need to guess I have asked that question before and was told that it can create a "navigation hazard". ![]() Don't shoot the messenger ........ ![]() Edited by Spinnerbait165 1/16/2021 2:45 PM | ||
finbully![]() |
| ||
Elite Veteran Posts: 1065 ![]() ![]() ![]() Location: Hixson, TN (68.169.134.18) | Spinnerbait165 - 1/16/2021 2:44 PM pop22 - 1/16/2021 12:46 PM When the repair is completed it would be nice if a marker was placed at the end of ramp on both sides so we wouldn't need to guess I have asked that question before and was told that it can create a "navigation hazard". ![]() Don't shoot the messenger ........ ![]() What a BS answer you got!!! | ||
Spinnerbait165![]() |
| ||
Member Posts: 44 ![]() Location: Weatherford, Texas (99.76.183.78) | finbully - 1/17/2021 10:39 AM Spinnerbait165 - 1/16/2021 2:44 PM pop22 - 1/16/2021 12:46 PM When the repair is completed it would be nice if a marker was placed at the end of ramp on both sides so we wouldn't need to guess I have asked that question before and was told that it can create a "navigation hazard". ![]() Don't shoot the messenger ........ ![]() What a BS answer you got!!! Ya Think? ![]() Edited by Spinnerbait165 1/17/2021 12:09 PM | ||
WarEagleChatt![]() |
| ||
Regular Posts: 68 ![]() ![]() Location: Hixson, TN (68.53.205.17) | Excavator was at the ramp today...I didn’t actually see it doing anything, just sitting behind the barricades. | ||
fischnrod![]() |
| ||
Addicted to CFF Posts: 5407 ![]() ![]() ![]() ![]() ![]() Location: dallas bay/soddydaisy (68.53.207.82) | I saw him working on the end where the biggest problem is | ||
drdetroit![]() |
| ||
Elite Veteran Posts: 628 ![]() ![]() ![]() Location: Hixson, TN (108.174.108.110) | Take pictures keep track! Dr Detroit | ||
WaterChap![]() |
| ||
Extreme Veteran Posts: 355 ![]() ![]() ![]() ![]() ![]() Location: Chattanooga (45.43.100.48) | Just as an FYI for everyone, if the 40’ line is correct, the ramp at the dam has 25’ left in the water as of yesterday. My trailer is 15’, wheels to hitch, so I have a good 10’ left. ----- I used to be able to catch fish! | ||
fischnrod![]() |
| ||
Addicted to CFF Posts: 5407 ![]() ![]() ![]() ![]() ![]() Location: dallas bay/soddydaisy (68.53.207.82) | WaterChap - 1/19/2021 9:09 PM Just as an FYI for everyone, if the 40’ line is correct, the ramp at the dam has 25’ left in the water as of yesterday. My trailer is 15’, wheels to hitch, so I have a good 10’ left. Has the monster hole on one side been repaired yet ? | ||
Spread the word
del.icio.us Digg Furl Reddit BB Google Ma.gnolia Netscape Simpy StumbleUpon Technorati Live Yahoo!
Jump to page : 1 Now viewing page 1 |
Search this forum Printer friendly version E-mail a link to this thread |