Point 1 ?

sully

New member
I installed a point 1 and nema 2000 to link my Ti2 to my HDS and the TI is working fine but the HDS seems to be a little off. I know its working as far as speed when i hit the trolling motor but it seems like its not always pointing straight. And the heading extension is flashing white to black and not sure why.
 

JoeFD

New member
Make sure you go into the unit settings and put primary gps source to point one. I had a similar problem when i first installed. Also if you have other units tied to it through NMEA they will need to be set the same independently for each unit, otherwise they will use the default in unit gps. I have four on my boat that are now tied into one.
 
Top