Kirk
Well-known member
Posting for a friend:
1971 16 ft Lund aluminum boat with trailer and a 33hp Evinrude and a 33hp Johnson. I do not know the year make of the motors , the Johnson is on the boat now and runs but needs seals in the lower unit. The Evinrude ran when taken off the boat but needs the tiller handle replaced, it is broken where it mounts to the motor, both are electric start.
There is a MotorGuide 30lb trolling motor with the boat. Two bench seat have been removed so I could build the floor. I also built a deck up front, that is framed out of 1" square tubing to keep weight down.
Trailer needs a new tire. I used the seat mounting system used in bass boats so I could move one to the deck when fishing.
The boat doesn't need much to be ready to use I just don't need it or have time to finish it.
I am asking $850.00.
Text 423-715-7426 </p>
</p>
</p>
</p>
</p>
He has more pictures posted on Tndeer.com
</p>
http://www.tndeer.com/forums/viewtopic.php?f=22&t=310716</p>
1971 16 ft Lund aluminum boat with trailer and a 33hp Evinrude and a 33hp Johnson. I do not know the year make of the motors , the Johnson is on the boat now and runs but needs seals in the lower unit. The Evinrude ran when taken off the boat but needs the tiller handle replaced, it is broken where it mounts to the motor, both are electric start.
There is a MotorGuide 30lb trolling motor with the boat. Two bench seat have been removed so I could build the floor. I also built a deck up front, that is framed out of 1" square tubing to keep weight down.
Trailer needs a new tire. I used the seat mounting system used in bass boats so I could move one to the deck when fishing.
The boat doesn't need much to be ready to use I just don't need it or have time to finish it.
I am asking $850.00.
Text 423-715-7426 </p>
</p>
He has more pictures posted on Tndeer.com
</p>
http://www.tndeer.com/forums/viewtopic.php?f=22&t=310716</p>