I have a buddy with an Evinrude motor with a cylinder down. Started running bad and blowing the fuse to the control for the oil system. Low oil light would come on and would only let you idle until you replaced the fuse. Took it in to get looked at and all cylinders at 115 to 120 except for one at 59 lbs.
Would you try to get someone to fix the engine, or trade it in on a good used motor. If you would fix it, do you have any suggestions on who and possible ballpark cost.
Would you try to get someone to fix the engine, or trade it in on a good used motor. If you would fix it, do you have any suggestions on who and possible ballpark cost.
