A Aries 181 Well-known member Joined Feb 16, 2007 Messages 1,548 Jul 8, 2018 #1 Will the jack plate bolt up to the hull using the existing holes already there? Thanks, Bill
L Lx545 Well-known member Joined Jun 6, 2016 Messages 374 Jul 8, 2018 #2 It should I was thinking all or most outboard had a standard hole patterns.
B BulletTJ Well-known member Joined Jun 19, 2006 Messages 1,333 Location Usa Jul 8, 2018 #3 It should fit the holes in you transom. Be sure to remove the old silicon from the bolt holes and reseal it. Grade 8 stainless steel bolts also.
It should fit the holes in you transom. Be sure to remove the old silicon from the bolt holes and reseal it. Grade 8 stainless steel bolts also.
FishingwithRusty Well-known member Joined Oct 3, 2013 Messages 2,450 Location Soddy-Daisy, TN Jul 9, 2018 #4 ^^^^^^what they said
