Fiberglass resin

[jmbwest]

I need to patch a small hole in the hull of my boat and was wondering if the resin would hold since the boat has a kevlar hull? Help would be greatly appreciated.

 

[NRG]

Kevlar hulls are only part Kevlar generally,and uses the same resin as in reg glass, you will need to grind or sand 2-4 inches past the damaged area, beveling the damaged area, if it is a hole or crack that goes through the hull you need to put a backer piece behind the repair let that cure then fiber glass the outside.

 

[jmbwest]

It is not all the way thru the hull. I can see the weave cloth without any resin over it. Thanks