F fischnrod Well-known member Joined Mar 7, 2006 Messages 5,249 Location dallas bay/soddydaisy Dec 7, 2011 #1 If I reset my unit to factory defaults do I have to re enter the number for the transducer I'm using?
If I reset my unit to factory defaults do I have to re enter the number for the transducer I'm using?
G getfished Member Joined Aug 14, 2011 Messages 18 Dec 8, 2011 #2 I'm not sure. I wouldn't think so. It may be different from mine . I have the older 797c2i. You could give them a call at 800-633-1468.
I'm not sure. I wouldn't think so. It may be different from mine . I have the older 797c2i. You could give them a call at 800-633-1468.
D Doug V Well-known member Joined Aug 5, 2010 Messages 789 Dec 8, 2011 #3 Defaults should restore back to the Dual Beam Plus Transducer. IF you are using an optional transducer like QuadraBeam or Wide SIde you would probably need to go into the Soanr Master Menu and Reset it.
Defaults should restore back to the Dual Beam Plus Transducer. IF you are using an optional transducer like QuadraBeam or Wide SIde you would probably need to go into the Soanr Master Menu and Reset it.
