Multiple River boats and fishing gear

Chattanooga Fishing Forum

Help Support Chattanooga Fishing Forum:

G

Guest

Guest
I got too much stuff and need to make space. I'll update with pictures whenever I get a chance.

1) 10' Whitewater Fabrication pontoon and frame (Maxxon tubes). It comes with Dierks anchor system and has standing platform and rear deck. It is designed for both rowing and kicking with fins. It has Sawyer Cobra oarlocks and Saywer SST oars (7.5' I believe), which have stoppers and are rope wrapped. MRSP w/ upgrades would be around $1500. I would like to get $1000 for it. I might consider selling for less without the oars. If it matters, tubes are green.

2) Manta Ray 11', it is labeled as a Liquidlogic but it is exactly the same as the Natives (ie no scupper under the seat). Used maybe a dozen time. The only mod that I have done is lightly glued a foam rod holder near the bow (for rod tips, as the butts are placed between the legs). If you keep the rod holder it will need to be more permanently mounted, as I was just testing the location out. If it matters the boat is yellow. price is $450.

3) Silver Creek Wooden Kayak paddle. This paddle has just been refurbished (by an employee of another paddle company, so it is a professional job), so it is in brand new showroom condition. Silver Creek's are a highly coveted paddle. This one is 204 cm long with 90 degree offset and is left-hand control. Price is $275.

4) Prijon Taifun (pronounced Typhoon), this is an old whitewater kayak. Don't buy to fish out of. I purchased cause I though I would start “training” to get in shape. Haha it never happened, well unless you consider round a shape. This would make a good adventure racer or off-road triathlon boat. Prijon plastic is the blow molded and is the toughest in the industry, but this boat is pretty thin. It does oil can, but only slightly. It doesn't have a seat back, but I may have one laying around that will work if you add cords or straps for mounting. It is also missing a drain plug. Price is $150. If it is matters, it is red in color.

5) Dagger Reflection 14' canoe. This is a solo or light to moderate weight tandem canoe. For river use I don't like more than 500-550 lbs in it. For lake use, I could go to 600 or 650 lbs of people and gear. It has 3 seats in it and comes with 2 sitbacker stadium chairs. I pulled this from the internet when I bought it several years ago:
MSRP $1,100.00. A short, highly maneuverable canoe, the Dagger Reflection 14 is stable and ideal for sporting, photography and fishing.Bow, center and stern seats make for efficient tandem or solo paddling.Light, asymmetrical hull allows for speed and tracking.Light weight provides easy handling in and out of the water.Polyethylene deck plates, underseat water bottle holder.Wooden seats.Length 14?, width 36?.Width at 4? waterline: 34¾”.Depth (cnt/end): 13½”/16½”. 59 lbs.6? freeboard: 700 lbs. Rocker (bow/stern) 2?/2?. Royalex® ABS laminate
.
For anyone who might care, it is green with grayish tan interior and I am asking $550 for the canoe, 2 sitbackers, and 2 paddles (one Mohawk and one Carlise).

Accessories for sale too (make offer):

5a) Old Town Side Saddle mount; this allows you to mount in rear w/ 2 in the canoe or in the middle if solo.

5b) Minnkota Endura 30 lb thrust on a 30 inch shaft.

5c) 3 hp Tanaka air cooled outboard w/ internal tank. Tanaka also made Sears Gamefisher motors (as did Eska and others). Believed to be a 1999 or 2000 model. Starts with one pull. 20-inch shaft (ie long shaft). Never tried it on the canoe, I believe it is too powerful for the canoe. Oh yeah, only weighs 24 lbs (without gas).

5e) Bass Pro Shop Graphite Series, 6 ft, MH, 3/8-3/4 oz, and 10-20 lb test. This is a one-piece pistol grip rod. Model number GS60MHC
MRSP is $35 plus shipping. I'll take $20. It does have one flaw. I didn't like the horn so I tried to padded it with tape, while cutting the tape off I scratch the a straight line below the horn. It doesn't have any sharp edges, and when you run your finger across it feels smooth.

5f)) Quantum Baitcaster, straight cork grip, IM6, MH, 1/4-1 oz, 10-20 lb test. Model number is QT6C66MH, one piece. I'll take $35.

I would prefer cash, especially for the bigger ticket stuff but I will entertain offers for fishing/boating gear and possible guns or Primo or… whatever else you have that I might want. My location is in Cleveland and I don't plan on shipping anything.

Thanks for looking.
R14
 
I want that pontoon. I guess I will have to fork over the money to get it. I have a dagger impulse to trade? What would that bring the price down to?
 
zfish, let me know when you get back into town. We'll set up a time to let you test the toon out.
 
I'll will also consider selling just the toon's tubes or just the oars and oarstands.
 
Thanks, Spur.

I should be able to imageshack or photobucket them, but I got to take the pictures first. Haha. No room at my place, stuff is scattered at various storage locations.
 

Latest posts

Back
Top