Navionics question

Chattanooga Fishing Forum

Help Support Chattanooga Fishing Forum:

Fshn Cpa

Well-known member
Joined
Jul 9, 2009
Messages
1,013
I have an HDS 5 gen 1 and a gen 2 that are linked. Do I just nee one navionics card?
 
djsmarinelectronics - 10/9/2018 10:37 AM

In order to share mapping you need a Gen2 touch or newer with the latest updates; you will need two cards for your current sysstem
I have 2- gen 2 non touch that are linked together with an ethernet cable. They share mapping just fine with 1 nav chip.
 
Found a few fish. Enough that I can take my boater if needed and he wants to listen. Not so good Friday. A few small fish and hit some rocks. Took off half of my skeg and curled two blades on my prop. Waiting for Progressive adjuster to call me back. Thanks for the info Silvertalon
 
silvertalon - 10/12/2018 9:28 AM

djsmarinelectronics - 10/9/2018 10:37 AM

In order to share mapping you need a Gen2 touch or newer with the latest updates; you will need two cards for your current sysstem
I have 2- gen 2 non touch that are linked together with an ethernet cable. They share mapping just fine with 1 nav chip.

He is still not going to share mapping with a Gen 1; which map are you running Mr Silvertalon?, do you have selective shading and fish reveal as well?
 
djsmarinelectronics - 10/12/2018 7:58 PM

silvertalon - 10/12/2018 9:28 AM

djsmarinelectronics - 10/9/2018 10:37 AM

In order to share mapping you need a Gen2 touch or newer with the latest updates; you will need two cards for your current sysstem
I have 2- gen 2 non touch that are linked together with an ethernet cable. They share mapping just fine with 1 nav chip.

He is still not going to share mapping with a Gen 1; which map are you running Mr Silvertalon?, do you have selective shading and fish reveal as well?
Didn't know Gen 1's didn't link up with gen 2's. Thanks.
 

Latest posts

Back
Top