I got stuff lying around I haven't used since I retired nine years ago at the ripe old age of 53 (brag, brag, brag).
2,000 pound torque wrencch
500 pound 4:1 torque multiplier
1" Ingersol Rand impact wrench
1" drive ratchet (Armstrong with spare head rebuild kit: can you believe we used to bust these things?)
1" drive sockets up to 3" or so
Sluggers up to 3" or so.
Aluminum Railroad Jack
12 KW 3 phase generator (hooked up to propane tank and running) with automatic transfer switch. YOU CAN DROP ONE LEG and use this on a house but will only give you 8 KW. That's the way I have it set up now.
Cant hook.
One ton propane fork lift (rough but runs, no leaks last time I ran it.)
I" shackles
Plate Dogs
15 ton Four Part block
Couple of heavy beams. Rolled like a metal building Cee but 3/8 plate and about 6" x 12" and 30 foot long
A few pieces of heavy angle 4 x 6 x 1/2 (guessing
Dozen pieces of rolled aluminum sheet for the home made pontoon boat I never built (got a good deal on a Tracker).
Two Gas welders on trailers. Rough but they will run and weld and smoke.
12' long post hole diggers with indestructible stainless steel shovel blades.
20,000 volt megger
1/2" Matched pair 6 ' or 8'? rigging chains super high strength
PM me or call me
Steve Campbell
402-0880
2,000 pound torque wrencch
500 pound 4:1 torque multiplier
1" Ingersol Rand impact wrench
1" drive ratchet (Armstrong with spare head rebuild kit: can you believe we used to bust these things?)
1" drive sockets up to 3" or so
Sluggers up to 3" or so.
Aluminum Railroad Jack
12 KW 3 phase generator (hooked up to propane tank and running) with automatic transfer switch. YOU CAN DROP ONE LEG and use this on a house but will only give you 8 KW. That's the way I have it set up now.
Cant hook.
One ton propane fork lift (rough but runs, no leaks last time I ran it.)
I" shackles
Plate Dogs
15 ton Four Part block
Couple of heavy beams. Rolled like a metal building Cee but 3/8 plate and about 6" x 12" and 30 foot long
A few pieces of heavy angle 4 x 6 x 1/2 (guessing
Dozen pieces of rolled aluminum sheet for the home made pontoon boat I never built (got a good deal on a Tracker).
Two Gas welders on trailers. Rough but they will run and weld and smoke.
12' long post hole diggers with indestructible stainless steel shovel blades.
20,000 volt megger
1/2" Matched pair 6 ' or 8'? rigging chains super high strength
PM me or call me
Steve Campbell
402-0880
