Now Paired up with TH Marine - Equalizer, Eliminator, Oxygenator and G-Force plus many more products

Chattanooga Fishing Forum

Help Support Chattanooga Fishing Forum:

djsmarinelectronics

Well-known member
Joined
Jan 8, 2012
Messages
2,355
Location
Ringgold GA
Now Paired up with TH Marine - Equalizer, Eliminator, Oxygenator and G-Force plus many more products

I now have access to TH Marine products which is a great asset. Here are some of the new products they offer:

G-Force EQUALIZER™ Trolling Motor Lift Assist

Reduce the lifting weight of your trolling motor by as much as 50%.
The G-Force EQUALIZER™ trolling motor list assist system consists of two air pistons that attach to almost any Motorguide Gator Mount to provide effortless lifting in-and-out of the water. Complete with easy-to-follow instructions, drilling template, and marine-grade hardware, the EQUALIZER™ is quick and straightforward to install. A must-have for any Motorguide owner, the EQUALIZER™ is a great way to offset the added weight of StructureScans and Hydrowaves, so your time on the water is as comfortable as possible.
Includes:
- 2X EQUALIZER™ Trolling Motor Assist Air Pistons
- Drilling template
- Marine-grade stainless steel hardware
- Instructions
- Picture of the mount and basic guidelines
- Equalizer decal
- Available in Black,<font color="red">Red,</font> and <font color="blue">Blue</font>
- Spacer set available for certain boats that need a riser spacer on gunnel

Easy to install: https://www.youtube.com/watch?v=-672BuodI54&feature=youtu.be
 

Attachments

  • equalizer.png
    equalizer.png
    89.1 KB
Re: Now Paired up with TH Marine = Equalizer, Eliminator and G-Force plus many more products

G-Force ELIMINATOR™ Trolling Motor Prop Nut

The ELIMINATOR™ Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR™ Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and Motorguide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the the ELIMINATOR™ Prop Nut.

Please Note:
- Will not work with Kipawa and Hydrilla Hacker Props.
- Minn Kota nut available in two sizes - one for 80lb thrust and above, one for below 80lb thrust.
GFEL-MG- models fit Motorguide
GFEL-MK- models fit Minn Kota 80,101 and 112 models.
GFEL-MKS- models fit Minn Kota 30 thru 75.


Key Eliminator Benefits:

- Machined from 6061 Billet Aluminum
- O-ring dampens noise/vibration and secures nut
- Wider contact area for a more stable prop
- Cooling ports aid in heat dissipation
- Anodized protected
- No tools needed
- Available in popular colors
- Visually appealing
- Designed and made in the U.S.A.
- Patent pending

Actual finishes may vary due to anodizing process.
Available in Red, Blue, Black and Silver
 

Attachments

  • eliminator.jpg
    eliminator.jpg
    16.3 KB
  • eliminator4.jpg
    eliminator4.jpg
    25.7 KB
Re: Now Paired up with TH Marine = Equalizer, Eliminator and G-Force plus many more products

The OXYGENATOR™

https://www.youtube.com/watch?v=tKX56ZCO6N8

Pro Live Well Flush Mount
The OXYGENATOR™ Pro Live Well Flush Mount is a lvewelll oxygen geneator that will retrofit most boat live wells from 10 to 20 gallons and operates off the existing boat battery.

The Oxygenator™ manufactures 100% pure oxygen by splitting the hydrogen molecule from the oxygen molecule in water. This creates a super saturated oxygen environment, even in the warmest water.

Independent testing shows increasing oxygen in livewell improves fish survival by over 35%.


Pro Live Well Flush Mount Details:

Injects 100% pure oxygen into livewell or baitwell
Increases fish survival over 35%
Power requirement: 12V DC drawing less than 1amp
No switch required - automatically activated when live well fills with water
Easy installation instructions
Silent running
Emitter size 3.375 inches in diameter
Rated capacity 10-20 gallons
3 year warranty
Includes: Installation instructions
 

Attachments

  • oxygenator.jpg
    oxygenator.jpg
    13.2 KB

Latest posts

Back
Top