Kirk
Well-known member
I tweaked my Remington 700 SS Inline and added some new features. I ordered a Boyd Brothers thumbhole stock and decided to put it on since it is raining. I also wanted to do some trigger work to ease the trigger pull a little.
</p>
</p>
Before the modifications: (black block under rifle is just holding it up for photo.
</p>
</p>
</p>
I had to tear it down for the work.</p>
</p>
Added a new thumb hole stock and buffed the trigger pull down a few pounds. I had to inlet the trigger slot on the new stock so the trigger guard would fit.</p>
</p>
Here is s view of the new thumb hole feature.</p>
</p>
</p>
NOW.............here is the down side. The dang ramrod won't fit in the Boyd factory slot and I have to inlet it to allow clearance.
</p>
</p>
</p>
</p>
</p>
</p>
Before the modifications: (black block under rifle is just holding it up for photo.
</p>
</p>
I had to tear it down for the work.</p>
Added a new thumb hole stock and buffed the trigger pull down a few pounds. I had to inlet the trigger slot on the new stock so the trigger guard would fit.</p>
Here is s view of the new thumb hole feature.</p>
</p>
NOW.............here is the down side. The dang ramrod won't fit in the Boyd factory slot and I have to inlet it to allow clearance.
</p>
</p>
</p>
</p>
