2.4L and 2.0L Parts for Sale

[jowens]

Two 2.4L Flywheels - 30 Each + Shipping

One 2.0L Flywheel - 30 + Shipping

Two Mariner Clamshell Cowls w/ 200 decals - 50 Each OBO + Shipping

One Mercury 150 XR2 Clamshell Cowl - 50 Each OBO + Shipping

One Mercury Starter- 25 + Shipping

One 2.0L Mercury Exhaust Divider Plate- 75 + Shipping

One 2.4L Mercury Exhaust Divider Plate- 75 + Shipping

One 2.0L Vertical Front Half, manifold, reed blocks, metal reeds - 80 OBO + Shipping

One 2.4L 5 petal manifold with all new Boysen reeds except one reed block has a broken reed and will need another reed block. - 50 + Shipping

One 2.4L 5 petal front half & manifold. Boysen reeds. One of the Sealing Ring Landings is questionable. Looks to be repairable. 75 + Shipping

Three Cranks, two from a 2.4 and the other from a 2.0. All have damaged journals. 25 each + shipping

One- Mid section & clamp, drilled like a offshore mid, 3 ram trim, solid mounts, 2.4 200 tuner. 500 OBO + Shipping

One Mariner Mid Section can only - 100 + shipping.

One Mariner clamp, three ram trim - 250 + Shipping

One 2 piece exhaust plate w/ 2.4L 200 tuner - 75 + Shipping

I can partially put the mariner mid together. I have 3 solid mounts to go in it and am missing some bolts. 400 + shipping

Coned 200 case, 2:1 gears, pre load case, bob's cone. - 800 + shipping

Also have 5 or so 2.0 L cast pistons. Make offer.

I'll get pics up tonight. If you feel that the price on something is too high, pm me with an offer and we'll see if we can work out a deal.

 

[Guest]

Get in touch with wretchin, he is your mercury man.

 

[wrechin2]

They all have + shipping. Where are you located????

 

[jowens]

I'm in Murfreesboro, TN. I copied my ad from S&F. I'd be willing to meet at the top of monteagle mnt for anyone over in E. TN

 

[jowens]

Fuel Enrichment Valve - 30 Shipped

 

[wrechin2]

I was just up there at Joe B Jackson staying with relatives for a few days. Are the 2.4 flywheels 9 or 16 amp????

 

[jowens]

Any way to tell? I am guessing 16 amp, but not positive.

 

[wrechin2]

Measure the width of the magnets.

 

[jowens]

What should the widths be for each?

 

[wrechin2]

A 16 amp will measure around 7/8. A 16amp flywheel will work on either a 16 or 9 amp stator but a 9 amp flywheel will only work on a 9 amp stator.

 

[jowens]

I'll get a measurement on it

 

[wrechin2]

I have a guy that needs one...... Just let me know.

 

[jowens]

red flywheel magnets are a little over 1" maybe 1 1/8 " tall and 3/4" wide
the green flywheel magnets are 3/4" by 3/4"

 

[jowens]

The green fly wheels should be 16 amp as far as i know. My flywheel on my 2.4l is a 16 amp, and is identical to the two green ones i have. I believe the red one came off of a 2.0l

 

[wrechin2]

The 9 amp uses a 1/2" laminated stator and the 16 amp is a 5/8" lamination. The 3 16 amp flywheels I got measure 3/4 X 7/8 tall. and have a casting number of 74787 on the bottom. 2.0, 2.4, and 2.5 flywheel will interchange. They all went grey around 84-85. EXCEPT for the late 80's 40 amp system. Color means nothing. The red flywheel if has 134 teeth uses the 10 tooth starter and if has 94 teeth uses the 8 tooth starter. It is more than likely a early 9 amp. With 3/4 X 3/4 magnets, sound like 9 amp flywheels. That is not a bad thing though.

 

[ole blue]

Josh is a stand up guy. It is what he says it is.

 

[jowens]

Green/Greyish in color. 94 teeth on all three.

 

[wrechin2]

They go with 8 tooth starters then which is mostly what you will find. I will let my buddy know.

 

[jowens]

I will let all this stuff go for a killer price if anyone wants the whole lot of stuff. PM me and we'll work out a deal.

 

[jowens]

Still got most of it for sale. TTT